Automatic Engine Shutdown Systems:
Required for Diesel Engines
gas suppressants and HFC-227ea will not
stall a diesel engine.
fire breaks out aboard a diesel powered vessel, the engine(s)
must be shut down immediately for the Fireboy fire
extinguisher system to effectively extinguish the fire.
Continued engine operation may remove the agent, lowering
the concentration required to effectively extinguish the
fire, making an Engine Shutdown System necessary.
NOTE: Each system
includes two (2) individual relays for propulsion
engines for redundancy.
Engine Shutdown Manual and Installation (ESC Series)
Engine Shutdown Manual and Installation (ES / ELS
Engine Shutdown Model Selection Chart
First Select from the Three Series Available:
Featuring an ISO 54 Enclosure, internal terminals,
heyco wire connectors, along with a see thru cover to easy observe
circuit board mounted L.E.D.'s which indicate circuit board and
Fireboy Extinguisher status, or that a fault condition exists.
Non-energized relays. A combination of models including 6, 8, and 10
circuits. Select from a combination of relays; 30 amp, (operating
range 100mA to 30amp), 10amp, (operating range 100mA to 10 amp) and
2 amp gold plated relays, (operating range 10uA to 2 amps).
All ESC models operate on Multi-Voltage 12/24/32
All models come with a square grey Waterproof
Membrane Touch Switch featuring multi-colored and dimmable L.E.D.'s
for the helm station with override function.
Engine circuit relays feature an operating range of
10uA to 2 amps. Auxiliary relays have an operating range of 100mA to
10 amps for the shutdown of generators, dampers, louvers, and other
types of related engine room equipment.
All ELS models are 12/24/32 VDC compatible with
a choice of either a round or square helm display.
Combination of 2 amp gold plated relays for low current equipment
and electronic engines, plus standard 10 amp relays.
Available for shutting down up to eight circuits
with engine circuit relays featuring an operating range of 100mA to
10 amps. Available in either 12VDC or 24VDC models.
The 24VDC models are designed to work on
multi-voltage engines and equipment installations.
The ES model comes with a choice of either a round
or square helm station display.
Each engine shutdown display unit comes with an integrated alarm
horn, charged / discharged lights and an override switch for restart or
control of auto-shutdown. Additional units and wire harnesses are
available for a second station.